BST01(Super tough PA6)

Description

• Product Name: PA6-I
• Product grade: Injection molding grade
• Product features: Super tough nylon 6, with extremely excellent low-temperature (-40℃) impact resistance, meeting ROHS requirements.
• Product color: Natural color
• BST01 is a rubber toughened PA6 for special use, it performs prominent anti-impact strength at low temperature(-40℃).
• Product applications: Skates stents, etc.

Typical molding process

Dry	Drum wind oven：         100～120℃，4～6h；Cycling warm air：         100～120℃，4～6h；Vacuum drying oven：      100～120℃，3～4h；
Processing temperrature	Feed section：225～240℃Compressing section：250～280℃Metering secion：250～280℃
Injection pressure	50～100MPa
Packing pressure	30～70 Mpa
Mold temperature	60～90℃
Back pressure	5～10Mpa

Parameter

Test Item	Test Standard	Test Condition	Unit	Value
Others
Product Identification	ISO1043	——	——	PA6-I
Filler Content	ISO3451-1	——	%	/
Density	ISO1183	23℃	g/cm³	1.05
Molding shrinkage(parallel/ normal)	ISO 294-4	——	%	0.6/1.2
Melt Flow Rate	ISO 1133	250℃，2.16kg	g/10min	5
Viscosity number	ISO307	96%H2SO4,0.5g/dl	ml/g	/
Mechanical
Flexural Strength	ISO178	23℃，2mm/min	MPa	70
Flexural Modulus	ISO178	23℃，2mm/min	MPa	1600
Tensile Strength	ISO527	Type I spline,50mm/min	MPa	50
Tensile Module	ISO527	Type I spline,1mm/min	MPa	/
Tensile Strain at Break	ISO527	Type I spline,50mm/min	%	/
Charpy Notched Impact Strength	ISO179/1eA	23℃,4J	kJ/m2	75/P
Charpy Unnotched Impact Strength	ISO179/1eU	23℃,4J	kJ/m2	N
Izod Notched Impact Strength	ISO180/1eA	23℃	kJ/m2	70/P
Izod Unnotched Impact Strength	ISO180/1eU	23℃	kJ/m2	N
Thermal
Melting Temperature	ISO11357	——	℃	220
Electrical
Volume Resistivity	IEC60093	——	Ω•cm	1014
Surface resistivity	IEC60093	——	Ω	1013
Flammability
Flammability	UL-94	1.6mm	Class	/

All is typical data, only for reference, not the permit of quality assurance.